Home improvement - Storage & Organization

Warehouse Cold Rooms: What Features Should You Consider Before Installation?

A cold room is essential to store fresh food items and medication. It provides a cool and stable environment for businesses to store their goods. Having a high quality cold room will ensure cost savings are made and your stock will be protected for years to come. Whereas having a poorly designed warehouse cold room will cause energy wastage and damage to your products. Below you’ll find some key features you should consider when designing your cold room. All written in a straightforward manner to make it easy to understand.

Why Should You Consider These Features?

All cold rooms operate like a large fridge. However, depending on the type of business you have, you will be storing different items. Bakers will store dough, florists will store petals and pharmacies will store vials which can go off when reaching a certain temperature. Each item will require specific temperatures.

Choosing the right features will ensure you won’t have to pay for any expensive alterations. Choosing the wrong features could cause warm spots and high energy bills. Choosing the right features will ensure your stock stays fresh and your staff won’t get stressed. Think of it like a recipe, using good ingredients will produce a delicious meal!

Room Size and Layout

Use a tape measure to calculate how many pallets and shelves you will need. Visualise the busiest time of the year and make sure you have enough room for your peak stock levels.Having a small room will restrict air flow and cause your staff to become frustrated. Whereas having a large room will cause extra energy usage. Try to find a good balance between the two and leave yourself a little bit of room to grow.Leave plenty of walkways so your pallet truck can turn easily. Ensure your door is in a position close to your loading bay. This will reduce how far your staff have to carry your goods. Every time you leave the cold room your stock will get warmer. Smart Warehouse Cold Rooms  are designed to follow your stock from the truck to the shelf. Draw up a layout for your cold room and ensure you mark out where your shelves will go. This will help the installer identify any issues.

Which Insulation Panels Work Best?

These act like a thick winter coat for your cold room. The best insulation panels will keep the cold trapped inside. Most businesses use panels with a polyisocyanurate or polyurethane foam core. These are great as they don’t let much heat through and are lightweight.

Ensure your panels have:

  • The right thickness for your desired temperature.
  • Fire rating to meet UK building regulations.
  • Smooth surface such as steel or food grade plastic.
  • Sealed joins so there is no air leakage.

If you’re creating a freezer room then you will need thicker panels. Thin walls on a freezer room will cause frosting and will waste energy. Ask your installer what the U-value of the panels are. The lower the value the better insulated your room will be. Spend a little more now and you will save money over the years.

Refrigeration Units That Match Your Stock

The heart of the cold room. The refrigeration unit will remove heat from the air inside. Ensure you have a unit powerful enough for your room size and the heat your goods will create. Hot deliveries will create a large load and busy doors will increase this.

Ask your installer to calculate the load carefully. They should know the volume of your room, how much stock you turn over each day and the outside temperature in the summer. Many places in the UK get warmer in July. So make sure you design your cold room to cope with the hottest day of the year. Reliable Warehouse Cold Rooms  will have a refrigeration unit sized to cope with peak demand in the summer.

Some owners will install 2 smaller units. This means if one breaks down, the other will keep your room cold. This gives you peace of mind knowing your room is fully stocked and will be kept cold. Modern units use low impact refrigerants to meet current UK guidelines. Choose a refrigerant with a low global warming score.

How Can Good Airflow Protect Your Goods?

Air will carry heat. You need to ensure your cold air reaches all your shelves. How much air flows inside your room will depend on your evaporator fans and how your staff stack your pallets. Ensure there is space between your boxes. If your staff push a wall of cartons against your fan this will stop the airflow.

Ensure your evaporator is positioned so the air can circulate throughout your room. Long rooms may need 2 units or a duct to push the air to the end of the room. After the first week use a thermometer to check for warm spots. A skilled installer will map out the temperatures in several spots and adjust the fans accordingly.

Choose open shelving made from metal. This will allow air to flow. Solid shelving will cause heat to build up. Choose shelving with large gaps and ensure your goods aren’t touching the walls or ceilings

Flooring and Door Choices

These parts of your cold room will suffer the most. Throughout the day forklifts will drive over your floor and your door will be opened by staff numerous times. Choosing weak features will cause air leakage and will need repairing.

Keep these features in mind:

  • Strong floor slab with insulation underneath.
  • Non-slip surface.
  • Heated door frames (for freezers) to prevent ice.
  • Strip curtains or fast doors to minimise warm air loss
  • Coved edges for easy cleaning.

Freezer floors will need a heated mat or a ventilated gap underneath the slab. Without this your floor will freeze and lift the concrete. Fast doors will save on energy use as they shut quickly. Adding a viewing panel will let drivers see people before opening. As cold rooms can be very busy you will have hundreds of door cycles per week. Choose strong hinges and durable seals. Keeping surfaces clean will prevent bacteria and help your business pass food hygiene inspections.

Smart Controls & Alarms system

Digital controllers allow you to set the temperature and monitor it. Modern panels can be connected to your phone so you will receive an alert if the temperature rises. Data loggers will record the temperature every few minutes. This will prove to inspectors your food was kept safe.

Alarms will act like a night guard. A good alarm will beep and send a text if your door is left open or your unit fails. Adding a battery back up will ensure your alarm still works if there is a power cut. Some companies will link the alarm to their generator. Having a strong back up will turn a disaster into a small issue.

What Energy Saving Features Should You Look For?

Cooling can be energy intensive. Choosing smart features will reduce your bill significantly. LED lighting doesn’t create much heat and will last for years. Variable speed fans will reduce speed when your room is cool. Electronic expansion valves will adjust the refrigerant flow to your requirements. Door heating controls will turn off when the risk of frosting reduces.

Heat recovery systems will collect the wasted heat from your refrigeration unit. This can be used to heat your offices or hot water. Solar panels on your roof can provide energy during the day. Efficient Warehouse Cold Rooms will significantly reduce your running costs.

Ask for a total cost. This will include the cost of installation and yearly energy bill. The cheapest quote may not be the best option as the cost can increase over the years.

Designing with ColdTec

Designing your cold room with an expert will make choosing the right features easier. ColdTec design and install cold storage for UK businesses in the food/medicine industry and retail. We will start with a site survey to measure your space and understand your stock. Our engineers will discuss your desired temperature and budget. We will then draw up a design.

Our team will install your cold room including fitting the panels and testing. After installation we will continue to support you with servicing and repairs. View our service details to see the range of cold rooms we offer and request a quote.

FAQ

How long does it take to install a cold room?

Small rooms can take a few days. Larger sites can take several weeks. This depends on the groundworks and panel size.

What temperature should my cold room be?

Most cold rooms will be between 0 and 5 degrees. Freezers will be around -18 degrees or below.

How often should my refrigeration system be serviced?

Most manufacturers recommend checking once or twice a year. This will help identify any small issues before they become expensive failures.

Can I expand my cold room?

A modular cold room will allow you to add more panels and units to your room. Plan how much extra space you will need so your power supply and layout can accommodate this.

Do I need planning permission?

Many indoor cold rooms won’t require permission. However, if you are installing outside you may need permission from your local council. Speak to your council and installer before starting.

Conclusion

Choosing the right features will help transform your basic box into a safe and cost-effective storage for your stock. Choosing the right size and layout will set you off on the right foot. Strong insulation and a well-matched refrigeration unit will keep your cold room at a constant temperature. Good air flow, strong flooring and doors will help Protect Your Goods and staff. Smart controls and energy efficient features will protect your budget throughout the UK. Carefully plan each feature and your stock will stay fresh for years. Contact us to help you move forward with your project.

Leave a Reply

Your email address will not be published. Required fields are marked *