A box of frozen donuts or a prepared food item shows no sign of damage in the freezer display and arrives at the front doors of the store damp, soft at the corners, and with ink smudged, but it’s due to the freezer, not the food in the box. The box couldn’t have failed. It simply transgressed a temperature line that packaging specs do not usually consider. Read this guide to understand why that is, what boards and coatings do not, and how to determine whether a board does, before committing to an entire order. Empress Packaging is a manufacturer and wholesaler of food boxes and donut boxes to retail food distributors nationwide in the USA.
When does a cold box sweat when it arrives at the sales floor?
The reason is that warm air can contain more moisture than cold air, and the wet air releases moisture as soon as it comes into contact with the cold surface. A moist, warm atmosphere, like a warm glass that sweats in warm weather, is applied to the surface of the box that is held at a freezer or cooler temperature, resulting in moisture condensing directly onto the surface of the box. Custom auto-lock bottom boxes, and other bakery items that are shipped from a frozen or chilled distribution point into a non-refrigerated retail location are experiencing the same change, and frequently multiple times between the distribution center and the retail location.
What exactly happens to the box when it is wet?
The softening effect at the critical points, the corners and base of the board, increases the strength where it is needed the most. By softening the board at the points where it is most needed, the corners and base, it increases the strength where it is most needed. Greaseproof food boxes already have an external oil repellent, and condensation from the outside is a completely different issue and requires a different solution. When moisture remains on printed ink and coatings long enough, it can cause a cosmetic failure that appears to the consumer as a food-safety failure even though the seal under the printed ink is intact. Food-grade packaging material selected for grease resistance or food contact properties only may still be subject to this test, as both properties have nothing to do with surface moisture from outside air.
What are some ways to check for it before ordering it?
Recreate the transition and not simply a static humidity check. Keep a sample under the actual storage conditions at either a frozen or chilled temperature for the usual period of time that it would remain in storage, then transfer it immediately to a warm, humid room and allow it to remain there for one hour. Inspect the base and corners for softening, run a finger over the surface for any visible moisture, and check the print on the panel for blurring or lifting. If you have two or three cold-to-warm transitions in your supply chain, distribution center to store, etc., repeat the cycle two or three times.
FAQS
Q: Does this apply to frozen food only?
A: No, any product that is kept, meaningfully, below the temperature of the room it’s been transported to can have the same effect, and of course it’s not only frozen products.
Q: Does a moisture-resistant coating mean a grease-resistant coating?
A: Not necessarily. Check with the plant to see if one application is sufficient or if the box should be treated both inside and out.
Q: Whenever possible, can we get a physical sample before bulk production?
A: Physical proof is available prior to bulk production. Test in your own real transition from the cold to the ambient area before submitting an order for the whole thing.
Get a free quote on custom food packaging.
Provide your storage temperature and the actual temperature transitions in which your product is used, and Empress Packaging will provide you with an actual quote for food-grade packaging supply, not the food contact temperature requirements of your product. Just send a request for a free quote to empresspackaging.com, email your inquiry to query@empresspackaging.com or call (888) 900-7629.



